This is an old revision of the document!

A2000 FDD

  • mobo connector
    • is labeled CN
    • there is a jumper J301 which when open is one drive (DF0:) and when closed is two drives (DF0: and DF1:)
  • ribbon cable
    • default length is 22“
    • the 'middle' connector is for DF0:
      • it is 14” from the mobo connector
    • the last connector with the twist is for DF1:
      • it is 8“ from the DF0: connector
      • there is a twist at cable 4, 5, 6
  • power
    • the yellow cable is 5v
    • the 'inner' two blue cables are GND
    • the red cable is 12v
Last modified: le 2022/09/12 02:15

Page Tools