=====ZuluSCSI=====

I've used these in 

  * Amiga on A2091 cards
  * Mac Classic connected to mobo SCSI



====Troubleshooting====

The LED indicator normally flashes to indicate disk activity.

Upon initial power-on, the activity LED also reports following status conditions:

  * 1 fast blink on boot: Firmware successfully loaded, and at least one image file loaded successfully
  * 3 fast blinks: No images found on SD card, and then automatically falls back to raw passthrough mode.
  * 5 fast blinks: SD card not detected
  * Continuous morse pattern: firmware crashed, morse code indicates crash location
  * No LED activity: verify the 'BOOT' configuration switch is OFF

If a crash occurs, the firmware will also attempt to save information to a separate zuluerr.txt log file, on the root of the SD card.